Location:  Home » Gas Pumps » Endurance Pump Tests With Fresh and Purified MIL-PRF-83282 Hydraulic Fluid  

Endurance Pump Tests With Fresh and Purified MIL-PRF-83282 Hydraulic Fluid

Endurance Pump Tests With Fresh and Purified MIL-PRF-83282 Hydraulic FluidAuthors: Lois J. Gschwender, Shashi K. Sharma, Carl E. Synder, Gregory J. Cecere, Timothy A. Jenney
Publisher: Storming Media
Category: Book



Media: Spiral-bound
Pages: 111

ISBN: 1423539400
EAN: 9781423539407
ASIN: 1423539400

Publication Date: 1999

Editorial Reviews:

Product Description
This is a AIR FORCE RESEARCH LAB WRIGHT-PATTERSON AFB OH MATERIALS AND MANUFACTURING DIRECTORATE report procured by the Pentagon and made available for public release. It has been reproduced in the best form available to the Pentagon. It is not spiral-bound, but rather assembled with Velobinding in a soft, white linen cover. The Storming Media report number is A778573. The abstract provided by the Pentagon follows: Recently the US Armed Forces began using portable external purifiers to clean used hydraulic fluid to permit its continued use in aircraft systems and to reduce the hydraulic fluid waste stream. Two endurance pump tests were conducted with F-16 aircraft hydraulic pumps, using both fresh and purified MIL- PRF-83282 hydraulic fluid, to determine if fluid purification had any adverse effect on pump life. The first test was conducted using fresh MIL-PRF-83282 hydraulic fluid. The second test was conducted with hydraulic fluid that was circulated for 75 minutes through a fluid purifier after every 300 hours of pump testing. The failure modes were similar for both the tests. In the first test, the barrel-bearing failed after 1343 hours whereas, in the second test, both the shaft-bearing and the barrel-bearing failed after 1513 hours. The difference in the bearing lives from the two tests is not significant. Rolling element bearings, made out of AISI 52100 steel, seem to be the weak link in the F-16 main hydraulic pump. The pump life may be considerably increased by the use of better bearing material such as M50 steel. There was no significant difference in pump performance. The fluid purification did not adversely affect the pump life.



-----------
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED "AS IS" AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.